Настройки CAPsMAN wifi-qcom hap ax2
Добавлено: 12 мар 2025, 10:30
Manual provision can be done under /interface/wifi/capsman/remote-cap/provision to provision all radios associated with specific CAPs, it can also be done under /interface/wifi/radio/provision , to provision specific radios.
CAPsMAN cannot manage it's own wifi interfaces using configuration.manager=capsman, it is enough to just set the same configuration profile on local interfaces manually as you would with provisioning rules, and the end result will be the same as if they were CAPs. That being said, it is also possible to provision local interfaces via /interface/wifi/radio menu, it should be noted that to regain control of local interfaces after provisioning, you will need to disable the matching provisioning rules and press "provision" again, which will return local interfaces to an unconfigured state.
Provision must be done only initially, and is done automatically upon CAP joining if there are matching provisioning rules that are enabled.
If you adjust any configuration profile that is linked to the provisioned interface, all changes will be "pushed" as soon as you apply changes to the profile, with no need to re-create the already existing interface.
Provisioning itself is not for sending configuration, it is for essentially creating a new interface. In most cases, there is no reason to perform manual provisioning once you already have CAP interfaces running.
Перевод:
CAPsMAN не может управлять собственными интерфейсами Wi-Fi с помощью configuration.manager=capsman, достаточно просто вручную установить тот же профиль конфигурации на локальных интерфейсах.
Только будет ли бесшовность работать между точкой и основным....
CAPsMAN cannot manage it's own wifi interfaces using configuration.manager=capsman, it is enough to just set the same configuration profile on local interfaces manually as you would with provisioning rules, and the end result will be the same as if they were CAPs. That being said, it is also possible to provision local interfaces via /interface/wifi/radio menu, it should be noted that to regain control of local interfaces after provisioning, you will need to disable the matching provisioning rules and press "provision" again, which will return local interfaces to an unconfigured state.
Provision must be done only initially, and is done automatically upon CAP joining if there are matching provisioning rules that are enabled.
If you adjust any configuration profile that is linked to the provisioned interface, all changes will be "pushed" as soon as you apply changes to the profile, with no need to re-create the already existing interface.
Provisioning itself is not for sending configuration, it is for essentially creating a new interface. In most cases, there is no reason to perform manual provisioning once you already have CAP interfaces running.
Перевод:
CAPsMAN не может управлять собственными интерфейсами Wi-Fi с помощью configuration.manager=capsman, достаточно просто вручную установить тот же профиль конфигурации на локальных интерфейсах.
Только будет ли бесшовность работать между точкой и основным....