Russian Users MikroTik | Форум пользователей MikroTik

MikroTik RouterOS 6.40 (c) 1999-2017 http://www.mikrotik.com/

[?] Gives the list of available commands
command [?] Gives help on the command and list of arguments

[Tab] Completes the command/word. If the input is ambiguous,
a second [Tab] gives possible options

/ Move up to base level
.. Move up one level
/command Use command at the base level
[admin@MikroTik] > export
# jul/30/2017 01:56:07 by RouterOS 6.40
# software id = 3Q2R-****
#
# model = 2011UiAS-2HnD
# serial number = *******
/interface bridge
add mtu=1500 name=LAN
/interface wireless security-profiles
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed \
mode=dynamic-keys name=***** supplicant-identity="" wpa2-pre-shared-key=\
******
/interface wireless
set [ find default-name=wlan1 ] country=russia disabled=no frequency=auto mode=\
ap-bridge security-profile=**** ssid=**** tx-power=11 tx-power-mode=\
all-rates-fixed wireless-protocol=unspecified wmm-support=enabled
/interface wireless nstreme
set wlan1 enable-polling=no
/ip dhcp-client option
add code=55 name=parameter_request_list value=0x01F90321062A
/ip pool
add name=dhcp_pool0 ranges=192.168.10.2-192.168.10.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=LAN lease-time=23h59m name=\
dhcp1
/ppp profile
add change-tcp-mss=yes name=beeline-l2tp remote-address=192.168.255.254 \
use-compression=no use-encryption=no use-mpls=yes
/interface l2tp-client
add add-default-route=yes allow=chap connect-to=tp.internet.beeline.ru \
default-route-distance=1 disabled=no max-mru=1420 max-mtu=1420 name=\
l2tp-out1 password=******* profile=beeline-l2tp user=***********
/interface bridge port
add bridge=LAN interface=wlan1
add bridge=LAN interface=ether2
add bridge=LAN interface=ether3
add bridge=LAN interface=ether4
add bridge=LAN interface=ether5
add bridge=LAN interface=ether6
add bridge=LAN interface=ether7
add bridge=LAN interface=ether8
add bridge=LAN interface=ether9
add bridge=LAN interface=ether10
/ip address
add address=192.168.10.1/24 interface=LAN network=192.168.10.0
/ip dhcp-client
add default-route-distance=10 dhcp-options=hostname,parameter_request_list \
disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.10.0/24 dns-server=192.168.10.1 gateway=192.168.10.1
/ip dns
set allow-remote-requests=yes
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1 src-address=\
192.168.10.0/24
add action=masquerade chain=srcnat out-interface=l2tp-out1 src-address=\
192.168.10.0/24
/ip route
add distance=1 dst-address=85.21.0.0/24 gateway=10.216.16.1
add distance=1 dst-address=85.21.192.3/32 gateway=10.216.16.1
add distance=1 dst-address=213.234.192.8/32 gateway=10.216.16.1
/system clock
set time-zone-name=Asia/Krasnoyarsk