Russian Users MikroTik | Форум пользователей MikroTik

/interface bridge
add admin-mac=D4:CA:6D:D7:DE:21 auto-mac=no l2mtu=1598 name=bridge-local
/interface ethernet
set [ find default-name=ether1 ] name=ether1-gateway
set [ find default-name=ether2 ] name=ether2-master-local
set [ find default-name=ether3 ] master-port=ether2-master-local name=\
ether3-slave-local
set [ find default-name=ether4 ] master-port=ether2-master-local name=\
ether4-slave-local
set [ find default-name=ether5 ] master-port=ether2-master-local name=\
ether5-slave-local
/ip neighbor discovery
set ether1-gateway discover=no
/interface wireless security-profiles
add authentication-types=wpa2-psk eap-methods="" management-protection=\
allowed mode=dynamic-keys name=Seva supplicant-identity="" \
wpa-pre-shared-key=****** wpa2-pre-shared-key=norton8998
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode \
band=2ghz-b/g/n basic-rates-b="" channel-width=20/40mhz-ht-above \
default-authentication=no disabled=no hw-protection-mode=rts-cts l2mtu=\
2290 mode=ap-bridge periodic-calibration=enabled rate-set=configured \
security-profile=Seva ssid=home787 supported-rates-b="" tx-power=18 \
tx-power-mode=all-rates-fixed wireless-protocol=802.11
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m \
mac-cookie-timeout=3d
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=3des
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge-local name=default
/interface pppoe-client
add ac-name="" add-default-route=yes allow=pap,chap,mschap1,mschap2 \
default-route-distance=1 dial-on-demand=no disabled=no interface=\
ether1-gateway keepalive-timeout=60 max-mru=1480 max-mtu=1480 mrru=\
disabled name=pppoe-out1 password=0b8110e4 profile=default service-name=\
omkc use-peer-dns=yes user=omkc465410
/system logging action
set 0 memory-lines=100
set 1 disk-lines-per-file=100
/interface bridge port
add bridge=bridge-local interface=ether2-master-local
add bridge=bridge-local interface=wlan1
/interface mesh port
add interface=bridge-local
/interface wireless access-list
add interface=wlan1 signal-range=-80..120
/ip address
add address=192.168.88.1/24 comment="default configuration" interface=\
ether2-master-local network=192.168.88.0
/ip dhcp-client
add comment="default configuration" dhcp-options=hostname,clientid interface=\
ether1-gateway
/ip dhcp-server network
add address=192.168.88.0/24 comment="default configuration" dns-server=\
192.168.88.1 gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add chain=input protocol=icmp
add chain=input connection-state=new dst-port=8291 protocol=tcp
add chain=input connection-state=established
add chain=input connection-state=related
add action=drop chain=input connection-state=new in-interface=!bridge-local
/ip firewall nat
add action=masquerade chain=srcnat comment="default configuration" \
out-interface=pppoe-out1 to-addresses=0.0.0.0
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www address=192.168.88.0/24
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/ip upnp
set allow-disable-external-interface=no
/system clock manual
set time-zone=+07:00
/system leds
set 0 interface=wlan1
/system ntp client
set enabled=yes primary-ntp=88.147.254.235 secondary-ntp=88.147.254.234
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=ether2-master-local
add interface=ether3-slave-local
add interface=ether4-slave-local
add interface=ether5-slave-local
add interface=wlan1
add interface=bridge-local
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=ether2-master-local
add interface=ether3-slave-local
add interface=ether4-slave-local
add interface=ether5-slave-local
add interface=wlan1
add interface=bridge-local