Интернет в нашу локалку через микротик через DIR-300

Обсуждение оборудования и его настройки
Ответить
dervish
Сообщения: 2
Зарегистрирован: 27 мар 2014, 20:22

Дано:

Микротик, на нем:
2, 3 порты – входящий интернет от провайдера 1
4 порт – локальная сеть удаленного предприятия
8-9-wifi – локальная сеть нашего предприятия (бридж) (192.168.81.0/24)

4 порт воткнут в тарелку wifi мост ubiquity, на другом конце моста – локальная сеть удаленного предприятия. (192.168.1.0/24)
В локалке удаленного предприятия D-Link DIR-300 (увы), на котором поднят DHCP, получает интернет через PPPoE и раздает на удаленное предприятие.
Наш микротик получил через DHCP-Client адрес 192.168.1.47


сеть 192.168.1.0/24 из 192.168.81.0/24 видна отлично.

Хочется получить интернет через 4 интерфейс - через локалку удаленного предприятия - через DLink DIR-300.

отключаю 2,3 интерфейсы

пингую из терминала микротика - "timeout", изредка "unable to route to host".

Соседняя машина включенная в ту же локалку 2го предприятия интернет видит нормально.

Где у меня ошибка?

 "Текущая конфигурация микротика"
# mar/28/2014 15:46:31 by RouterOS 5.26
# software id = JHD8-NAXQ
#
/interface bridge
add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \
disabled=no forward-delay=15s l2mtu=1520 max-message-age=20s mtu=1500 \
name=TARGET priority=0x8000 protocol-mode=none transmit-hold-count=6
/interface ethernet
set 0 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:C6:B3:DB \
master-port=none mtu=1500 name=ether1 speed=100Mbps
set 1 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=2C:AB:25:FE:FE:4E \
master-port=none mtu=1500 name=KAB50 speed=100Mbps
set 2 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=00:1D:60:CB:F3:92 \
master-port=none mtu=1500 name=KAB2 speed=100Mbps
set 3 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:C6:B3:DE \
master-port=none mtu=1500 name=ANT speed=100Mbps
set 4 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:C6:B3:DF \
master-port=none mtu=1500 name=ether5 speed=100Mbps
set 5 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:C6:B3:E0 \
master-port=none mtu=1500 name=ether6 speed=100Mbps
set 6 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:C6:B3:E1 \
master-port=none mtu=1500 name=ether7 speed=100Mbps
set 7 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:C6:B3:E2 \
master-port=none mtu=1500 name=TARGET-LOCAL speed=100Mbps
set 8 arp=enabled auto-negotiation=yes bandwidth=unlimited/unlimited \
disabled=no full-duplex=yes l2mtu=1520 mac-address=00:0C:42:C6:B3:E3 \
master-port=none mtu=1500 name=SETUPPING speed=100Mbps
/interface ethernet switch
set 0 mirror-source=none mirror-target=none name=switch1
set 1 mirror-source=none mirror-target=none name=switch2
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk eap-methods="" \
group-ciphers=aes-ccm group-key-update=5m interim-update=0s \
management-protection=disabled management-protection-key="" mode=\
dynamic-keys name=default radius-eap-accounting=no radius-mac-accounting=\
no radius-mac-authentication=no radius-mac-caching=disabled \
radius-mac-format=XX:XX:XX:XX:XX:XX radius-mac-mode=as-username \
static-algo-0=none static-algo-1=none static-algo-2=none static-algo-3=\
none static-key-0="" static-key-1="" static-key-2="" static-key-3="" \
static-sta-private-algo=none static-sta-private-key="" \
static-transmit-key=key-0 supplicant-identity=MikroTik tls-certificate=\
none tls-mode=no-certificates unicast-ciphers=aes-ccm wpa-pre-shared-key=\
"" wpa2-pre-shared-key=tar81tar81
/interface wireless
set 0 adaptive-noise-immunity=none allow-sharedkey=no antenna-gain=0 area="" \
arp=enabled band=2ghz-b/g/n basic-rates-a/g=6Mbps basic-rates-b=1Mbps \
bridge-mode=enabled channel-width=20/40mhz-ht-above compression=no \
country=no_country_set default-ap-tx-limit=0 default-authentication=yes \
default-client-tx-limit=0 default-forwarding=yes dfs-mode=none \
disable-running-check=no disabled=no disconnect-timeout=3s distance=\
dynamic frame-lifetime=0 frequency=2412 frequency-mode=manual-txpower \
frequency-offset=0 hide-ssid=no ht-ampdu-priorities=0 ht-amsdu-limit=8192 \
ht-amsdu-threshold=8192 ht-basic-mcs=\
mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7 ht-guard-interval=any \
ht-rxchains=0 ht-supported-mcs="mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,\
mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15,mcs-16,mcs-17,\
mcs-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-23" ht-txchains=0 \
hw-fragmentation-threshold=disabled hw-protection-mode=none \
hw-protection-threshold=0 hw-retries=7 l2mtu=2290 mac-address=\
D4:CA:6D:14:DD:17 max-station-count=2007 mode=ap-bridge mtu=1500 \
multicast-helper=default name=wlan1 noise-floor-threshold=default \
nv2-cell-radius=30 nv2-noise-floor-offset=default nv2-preshared-key="" \
nv2-qos=default nv2-queue-count=2 nv2-security=disabled \
on-fail-retry-time=100ms periodic-calibration=default \
periodic-calibration-interval=60 preamble-mode=both \
proprietary-extensions=post-2.9.25 radio-name=D4CA6D14DD17 \
rate-selection=advanced rate-set=default scan-list=default \
security-profile=default ssid=TARGET station-bridge-clone-mac=\
00:00:00:00:00:00 supported-rates-a/g=\
6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps supported-rates-b=\
1Mbps,2Mbps,5.5Mbps,11Mbps tdma-period-size=2 tx-power-mode=default \
update-stats-interval=disabled wds-cost-range=50-150 wds-default-bridge=\
none wds-default-cost=100 wds-ignore-ssid=no wds-mode=disabled \
wireless-protocol=802.11 wmm-support=disabled
/interface wireless manual-tx-power-table
set wlan1 manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbps:17,9M\
bps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54Mbps:17,HT20-0:\
17,HT20-1:17,HT20-2:17,HT20-3:17,HT20-4:17,HT20-5:17,HT20-6:17,HT20-7:17,H\
T40-0:17,HT40-1:17,HT40-2:17,HT40-3:17,HT40-4:17,HT40-5:17,HT40-6:17,HT40-\
7:17"
/interface wireless nstreme
set wlan1 disable-csma=no enable-nstreme=no enable-polling=yes framer-limit=\
3200 framer-policy=none
/ip hotspot profile
set [ find default=yes ] dns-name="" hotspot-address=0.0.0.0 html-directory=\
hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=\
cookie,http-chap name=default rate-limit="" smtp-server=0.0.0.0 \
split-user-domain=no use-radius=no
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m name=default \
shared-users=1 status-autorefresh=1m transparent-proxy=no
/ip ipsec proposal
set [ find default=yes ] auth-algorithms=sha1 disabled=no enc-algorithms=3des \
lifetime=30m name=default pfs-group=modp1024
/ip pool
add name=dhcp_pool1 ranges=192.168.81.101-192.168.81.254
/ip dhcp-server
add address-pool=dhcp_pool1 authoritative=after-2sec-delay bootp-support=\
static disabled=no interface=TARGET lease-time=2w name=dhcp1
/port
set 0 baud-rate=auto data-bits=8 flow-control=none name=serial0 parity=none \
stop-bits=1
/ppp profile
set 0 change-tcp-mss=yes name=default only-one=default use-compression=\
default use-encryption=default use-mpls=default use-vj-compression=\
default
set 1 change-tcp-mss=yes name=default-encryption only-one=default \
use-compression=default use-encryption=yes use-mpls=default \
use-vj-compression=default
/queue type
set 0 kind=pfifo name=default pfifo-limit=50
set 1 kind=pfifo name=ethernet-default pfifo-limit=50
set 2 kind=sfq name=wireless-default sfq-allot=1514 sfq-perturb=5
set 3 kind=red name=synchronous-default red-avg-packet=1000 red-burst=20 \
red-limit=60 red-max-threshold=50 red-min-threshold=10
set 4 kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=5
set 5 kind=none name=only-hardware-queue
set 6 kind=mq-pfifo mq-pfifo-limit=50 name=multi-queue-ethernet-default
set 7 kind=pfifo name=default-small pfifo-limit=10
/routing bgp instance
set default as=65530 client-to-client-reflection=yes disabled=no \
ignore-as-path-len=no name=default out-filter="" redistribute-connected=\
no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \
redistribute-static=no router-id=0.0.0.0 routing-table=""
/routing ospf instance
set [ find default=yes ] disabled=no distribute-default=never in-filter=\
ospf-in metric-bgp=auto metric-connected=20 metric-default=1 \
metric-other-ospf=auto metric-rip=20 metric-static=20 name=default \
out-filter=ospf-out redistribute-bgp=no redistribute-connected=no \
redistribute-other-ospf=no redistribute-rip=no redistribute-static=no \
router-id=0.0.0.0
/routing ospf area
set [ find default=yes ] area-id=0.0.0.0 disabled=no instance=default name=\
backbone type=default
/snmp community
set [ find default=yes ] addresses=0.0.0.0/0 authentication-password="" \
authentication-protocol=MD5 encryption-password="" encryption-protocol=\
DES name=public read-access=yes security=none write-access=no
/system logging action
set 0 memory-lines=100 memory-stop-on-full=no name=memory target=memory
set 1 disk-file-count=2 disk-file-name=log disk-lines-per-file=100 \
disk-stop-on-full=no name=disk target=disk
set 2 name=echo remember=yes target=echo
set 3 bsd-syslog=no name=remote remote-port=514 src-address=0.0.0.0 \
syslog-facility=daemon syslog-severity=auto target=remote
/user group
set read name=read policy="local,telnet,ssh,reboot,read,test,winbox,password,w\
eb,sniff,sensitive,api,!ftp,!write,!policy" skin=default
set write name=write policy="local,telnet,ssh,reboot,read,write,test,winbox,pa\
ssword,web,sniff,sensitive,api,!ftp,!policy" skin=default
set full name=full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,\
winbox,password,web,sniff,sensitive,api" skin=default
/interface bridge port
add bridge=TARGET disabled=no edge=auto external-fdb=auto horizon=none \
interface=SETUPPING path-cost=10 point-to-point=auto priority=0x80
add bridge=TARGET disabled=no edge=auto external-fdb=auto horizon=none \
interface=TARGET-LOCAL path-cost=10 point-to-point=auto priority=0x80
add bridge=TARGET disabled=no edge=auto external-fdb=auto horizon=none \
interface=wlan1 path-cost=10 point-to-point=auto priority=0x80
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=\
no
/interface ethernet switch port
set 0 vlan-header=leave-as-is vlan-mode=fallback
set 1 vlan-header=leave-as-is vlan-mode=fallback
set 2 vlan-header=leave-as-is vlan-mode=fallback
set 3 vlan-header=leave-as-is vlan-mode=fallback
set 4 vlan-header=leave-as-is vlan-mode=fallback
set 5 vlan-header=leave-as-is vlan-mode=fallback
set 6 vlan-header=leave-as-is vlan-mode=fallback
set 7 vlan-header=leave-as-is vlan-mode=fallback
set 8 vlan-header=leave-as-is vlan-mode=fallback
set 9 vlan-header=leave-as-is vlan-mode=fallback
set 10 vlan-header=leave-as-is vlan-mode=fallback
/interface l2tp-server server
set authentication=pap,chap,mschap1,mschap2 default-profile=\
default-encryption enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=\
1460 mrru=disabled
/interface ovpn-server server
set auth=sha1,md5 certificate=none cipher=blowfish128,aes128 default-profile=\
default enabled=no keepalive-timeout=60 mac-address=FE:EC:C1:BF:60:3B \
max-mtu=1500 mode=ip netmask=24 port=1194 require-client-certificate=no
/interface pptp-server server
set authentication=mschap1,mschap2 default-profile=default-encryption \
enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled
/interface sstp-server server
set authentication=pap,chap,mschap1,mschap2 certificate=none default-profile=\
default enabled=no keepalive-timeout=60 max-mru=1500 max-mtu=1500 mrru=\
disabled port=443 verify-client-certificate=no
/interface wireless align
set active-mode=yes audio-max=-20 audio-min=-100 audio-monitor=\
00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 frame-size=300 \
frames-per-second=25 receive-all=no ssid-all=no
/interface wireless sniffer
set channel-time=200ms file-limit=10 file-name="" memory-limit=10 \
multiple-channels=no only-headers=no receive-errors=no streaming-enabled=\
no streaming-max-rate=0 streaming-server=0.0.0.0
/interface wireless snooper
set channel-time=200ms multiple-channels=yes receive-errors=no
/ip accounting
set account-local-traffic=no enabled=no threshold=256
/ip accounting web-access
set accessible-via-web=no address=0.0.0.0/0
/ip address
add address=192.168.81.1/24 disabled=no interface=TARGET network=192.168.81.0
add address=192.168.1.1/24 disabled=yes interface=ANT network=192.168.1.0
/ip dhcp-client
add add-default-route=no disabled=no interface=KAB2 use-peer-dns=no \
use-peer-ntp=no
add add-default-route=no disabled=no interface=KAB50 use-peer-dns=no \
use-peer-ntp=no
add add-default-route=no disabled=no interface=ANT use-peer-dns=no \
use-peer-ntp=no
/ip dhcp-server config
set store-leases-disk=5m
/ip dhcp-server lease
add address=192.168.81.13 client-id=1:bc:ae:c5:4e:68:f1 disabled=no \
mac-address=BC:AE:C5:4E:68:F1 server=dhcp1
add address=192.168.81.12 client-id=1:38:aa:3c:65:9f:36 disabled=no \
mac-address=38:AA:3C:65:9F:36 server=dhcp1
add address=192.168.81.10 client-id=1:54:4:a6:e0:a6:7a disabled=no \
mac-address=54:04:A6:E0:A6:7A server=dhcp1
add address=192.168.81.21 client-id=1:0:24:1d:7f:be:ad disabled=no \
mac-address=00:24:1D:7F:BE:AD server=dhcp1
add address=192.168.81.20 client-id=1:0:1e:8c:62:14:48 disabled=no \
mac-address=00:1E:8C:62:14:48 server=dhcp1
add address=192.168.81.23 client-id=1:20:cf:30:ae:d6:54 disabled=no \
mac-address=20:CF:30:AE:D6:54 server=dhcp1
add address=192.168.81.40 client-id=1:90:e6:ba:2e:c9:b6 disabled=no \
mac-address=90:E6:BA:2E:C9:B6 server=dhcp1
add address=192.168.81.30 client-id=1:20:cf:30:ae:d6:47 disabled=no \
mac-address=20:CF:30:AE:D6:47 server=dhcp1
add address=192.168.81.22 client-id=1:dc:e:a1:a4:64:12 disabled=no \
mac-address=DC:0E:A1:A4:64:12 server=dhcp1
add address=192.168.81.11 client-id=1:74:de:2b:e9:88:7 disabled=no \
mac-address=74:DE:2B:E9:88:07 server=dhcp1
add address=192.168.81.29 comment=ZHDYNYAK disabled=no mac-address=\
D4:22:3F:7E:DA:CD server=dhcp1
add address=192.168.81.28 comment=KUPRIYASCHENKO disabled=no mac-address=\
7C:61:93:08:D9:93 server=dhcp1
add address=192.168.81.255 client-id=1:98:d:2e:5:2d:e9 comment=UNKNOWN \
disabled=no mac-address=98:0D:2E:05:2D:E9 server=dhcp1
/ip dhcp-server network
add address=192.168.81.0/24 dhcp-option="" dns-server=192.168.81.1 gateway=\
192.168.81.1 ntp-server="" wins-server=""
/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \
max-udp-packet-size=4096 servers=8.8.8.8,8.8.8.4
/ip firewall address-list
add address=192.168.81.10 disabled=no list=PRIVILEGED
add address=192.168.81.11 disabled=no list=PRIVILEGED
add address=192.168.81.1 disabled=no list=PRIVILEGED
add address=192.168.81.20 disabled=no list=PRIVILEGED
add address=192.168.81.21 disabled=no list=PRIVILEGED
add address=192.168.81.22 disabled=no list=PRIVILEGED
add address=192.168.81.23 disabled=no list=NORMAL
add address=192.168.81.30 disabled=no list=NORMAL
add address=192.168.81.31 disabled=no list=NORMAL
add address=192.168.81.40 disabled=no list=NORMAL
add address=192.168.81.28 disabled=no list=PRIVILEGED
add address=192.168.81.29 disabled=no list=PRIVILEGED
add address=87.240.128.0/18 disabled=no list=DROP_OUT
add address=217.20.147.94 disabled=no list=DROP_OUT
add address=89.111.48.12 disabled=no list=DROP_OUT
add address=95.131.24.187 disabled=no list=DROP_OUT
add address=189.187.164.160 disabled=no list=DROP_IN
add address=189.187.164.160 disabled=no list=DROP_IN
/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \
tcp-close-wait-timeout=10s tcp-established-timeout=1d \
tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \
tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncookie=no \
tcp-time-wait-timeout=10s udp-stream-timeout=3m udp-timeout=10s
/ip firewall filter
add action=accept chain=input disabled=no src-address-list=PRIVILEGED
add action=accept chain=forward disabled=no dst-address-list="" \
src-address-list=PRIVILEGED
add action=drop chain=forward comment="SOCIAL & OTHER STUFF" disabled=no \
dst-address-list=DROP_OUT src-address-list=NORMAL
add action=drop chain=input comment=UNKNOWN disabled=no src-mac-address=\
98:0D:2E:05:2D:E9
add action=drop chain=input comment="UNDER ATTACK" disabled=no \
src-address-list=DROP_IN
/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=KAB50
add action=masquerade chain=srcnat disabled=no out-interface=KAB2
add action=masquerade chain=srcnat disabled=no out-interface=ANT
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061 sip-direct-media=yes
set pptp disabled=no
/ip hotspot service-port
set ftp disabled=no ports=21
/ip neighbor discovery
set ether1 disabled=no
set KAB50 disabled=no
set KAB2 disabled=no
set ANT disabled=no
set ether5 disabled=no
set ether6 disabled=no
set ether7 disabled=no
set TARGET-LOCAL disabled=no
set SETUPPING disabled=no
set wlan1 disabled=yes
set TARGET disabled=no
/ip proxy
set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 \
cache-on-disk=no enabled=no max-cache-size=unlimited \
max-client-connections=600 max-fresh-time=3d max-server-connections=600 \
parent-proxy=0.0.0.0 parent-proxy-port=0 port=8080 serialize-connections=\
no src-address=0.0.0.0
/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=KAB50 scope=30 \
target-scope=10
add disabled=no distance=2 dst-address=0.0.0.0/0 gateway=KAB2 scope=30 \
target-scope=10
add disabled=no distance=3 dst-address=0.0.0.0/0 gateway=ANT scope=30 \
target-scope=10
/ip service
set telnet address="" disabled=no port=23
set ftp address="" disabled=no port=21
set www address="" disabled=no port=80
set ssh address="" disabled=no port=22
set www-ssl address="" certificate=none disabled=yes port=443
set api address="" disabled=yes port=8728
set winbox address="" disabled=no port=8291
/ip smb
set allow-guests=yes comment=MikrotikSMB domain=MSHOME enabled=no interfaces=\
all
/ip smb shares
set [ find default=yes ] comment="default share" directory=/pub disabled=no \
max-sessions=10 name=pub
/ip smb users
set [ find default=yes ] disabled=no name=guest password="" read-only=yes
/ip socks
set connection-idle-timeout=2m enabled=no max-connections=200 port=1080
/ip traffic-flow
set active-flow-timeout=30m cache-entries=4k enabled=no \
inactive-flow-timeout=15s interfaces=all
/ip upnp
set allow-disable-external-interface=yes enabled=no show-dummy-rule=yes
/mpls
set dynamic-label-range=16-1048575 propagate-ttl=yes
/mpls interface
set [ find default=yes ] disabled=no interface=all mpls-mtu=1508
/mpls ldp
set distribute-for-default-route=no enabled=no hop-limit=255 loop-detect=no \
lsr-id=0.0.0.0 path-vector-limit=255 transport-address=0.0.0.0 \
use-explicit-null=no
/port firmware
set directory=firmware ignore-directip-modem=no
/ppp aaa
set accounting=yes interim-update=0s use-radius=no
/queue interface
set ether1 queue=only-hardware-queue
set KAB50 queue=only-hardware-queue
set KAB2 queue=only-hardware-queue
set ANT queue=only-hardware-queue
set ether5 queue=only-hardware-queue
set ether6 queue=only-hardware-queue
set ether7 queue=only-hardware-queue
set TARGET-LOCAL queue=only-hardware-queue
set SETUPPING queue=only-hardware-queue
set wlan1 queue=wireless-default
/radius incoming
set accept=no port=3799
/routing bfd interface
set [ find default=yes ] disabled=no interface=all interval=0.2s min-rx=0.2s \
multiplier=5
/routing mme
set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m \
gateway-selection=no-gateway origination-interval=5s preferred-gateway=\
0.0.0.0 timeout=1m ttl=50
/routing rip
set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 \
metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \
redistribute-connected=no redistribute-ospf=no redistribute-static=no \
routing-table=main timeout-timer=3m update-timer=30s
/snmp
set contact="" enabled=no engine-id="" location="" trap-generators="" \
trap-target="" trap-version=1
/system clock
set time-zone-name=manual
/system clock manual
set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start=\
"jan/01/1970 00:00:00" time-zone=+04:00
/system console
set [ find port=serial0 ] channel=0 disabled=no port=serial0 term=vt102
/system health
set fan-mode=auto use-fan=main
/system identity
set name=MikroTik
/system logging
set 0 action=memory disabled=no prefix="" topics=info
set 1 action=memory disabled=no prefix="" topics=error
set 2 action=memory disabled=no prefix="" topics=warning
set 3 action=echo disabled=no prefix="" topics=critical
/system note
set note="" show-at-login=yes
/system ntp client
set enabled=yes mode=unicast primary-ntp=85.21.78.8 secondary-ntp=\
62.173.138.130
/system resource irq
set 0 cpu=auto
set 1 cpu=auto
set 2 cpu=auto
set 3 cpu=auto
set 4 cpu=auto
set 5 cpu=auto
set 6 cpu=auto
set 7 cpu=auto
/system routerboard settings
set baud-rate=115200 boot-delay=2s boot-device=nand-if-fail-then-ethernet \
boot-protocol=bootp cpu-frequency=680MHz enable-jumper-reset=yes \
enter-setup-on=any-key force-backup-booter=no silent-boot=no
/system upgrade mirror
set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=\
0.0.0.0 user=""
/system watchdog
set auto-send-supout=no automatic-supout=yes no-ping-delay=5m watch-address=\
none watchdog-timer=yes
/tool bandwidth-server
set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=\
100
/tool e-mail
set address=0.0.0.0 from=<> password="" port=25 starttls=no user=""
/tool graphing
set page-refresh=300 store-every=5min
/tool mac-server
set [ find default=yes ] disabled=no interface=all
/tool mac-server mac-winbox
set [ find default=yes ] disabled=no interface=all
/tool mac-server ping
set enabled=yes
/tool sms
set allowed-number="" channel=0 keep-max-sms=0 receive-enabled=no secret=""
/tool sniffer
set file-limit=1000KiB file-name="" filter-ip-address="" filter-ip-protocol=\
"" filter-mac-address="" filter-mac-protocol="" filter-port="" \
filter-stream=yes interface=all memory-limit=100KiB memory-scroll=yes \
only-headers=no streaming-enabled=no streaming-server=0.0.0.0
/tool traffic-generator
set latency-distribution-scale=10 test-id=0
/user aaa
set accounting=yes default-group=read exclude-groups="" interim-update=0s \
use-radius=no


vqd
Модератор
Сообщения: 3605
Зарегистрирован: 26 сен 2013, 14:20
Откуда: НСК
Контактная информация:

Все что в конфиге вы реально используете?
Рисуйте схему


Есть интересная задача и бюджет? http://mikrotik.site
dervish
Сообщения: 2
Зарегистрирован: 27 мар 2014, 20:22

Тема закрыта, разобрался.

Конфигурил из под WinBox,

при создании маршрута Gateway выбирал конкретный интерфейс.

В случае с прямым wan (где интерфейс получает через DHCP-Client IP, и этот же IP является гейтом "наружу") - все отлично

в случае если полученный IP - это внутренний, а гейтом наружу является другой адрес в той же подсети -
нужно указывать вместо интерфейса - конкретный адрес гейта наружу, который на этом интерфейсе.

Следом возникла еще одна проблема: если в Routes в одном маршруте указаны разные интерфейсы - при отвале одного из интерфейсов - падает весь маршрут.
Обошел это дело созданием после "главного" маршрута доп. по разным дистанциям, для каждого интерфейса отдельно.

Теперь осталось разобраться почему торренты используют 7-8 мегабит от канала в 50... но это уже не в этой теме.

Да, по конфигу - это только основной кусок при котором можно железку ставить на замену существующей.
Будем допиливать...


Ответить