Нужна помощь в настройке микротика. Mikrotik RBD52G-5HacD2HnD-TC. Микторик по ВПН подключается к рабочему ВПНу исользуя L2TP клиет. От провайдера получаю белый ip адрес. Нужно, чтобы домашний инет шел в инет, а сети 10.0.0.0/8 или подсети из нее шли через впн.
Пинги с микротика до рабочей сети идут. Не получается настроить, чтобы был доступ с домашнего компа до работы. Инет работает вроде нормально.
Код: Выделить всё
/export hide-sensitive
# apr/04/2020 15:27:47 by RouterOS 6.46.4
# software id = ZHR9-LGLV
#
# model = RBD52G-5HacD2HnD
# serial number = BEEB0A040D45
/interface bridge
add admin-mac=74:4D:28:FB:D8:6D auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether1 ] mac-address=00:13:77:A9:B3:1A
/interface l2tp-client
add allow=mschap2 allow-fast-path=yes connect-to=gw.example.com disabled=no keepalive-timeout=disabled name=work use-ipsec=yes user="corp\\user"
/interface wireless
set [ find default-name=wlan1 ] antenna-gain=0 band=2ghz-b/g/n channel-width=20/40mhz-XX country=russia disabled=no distance=indoors frequency=auto frequency-mode=manual-txpower mode=ap-bridge ssid=Mart wireless-protocol=802.11
set [ find default-name=wlan2 ] antenna-gain=0 band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX country=russia disabled=no distance=indoors frequency=auto frequency-mode=manual-txpower mode=ap-bridge ssid=Mart_5G wireless-protocol=802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip ipsec proposal
set [ find default=yes ] enc-algorithms=aes-128-cbc,aes-128-ctr,aes-128-gcm
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge lease-time=23h name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether2 network=192.168.88.0
/ip dhcp-client
add comment=defconf disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf dns-server=192.168.88.1 gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router.lan
/ip firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=drop chain=input comment="defconf: drop all not coming from LAN" in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related
add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none out-interface-list=WAN
/ip route
add check-gateway=ping distance=1 dst-address=10.0.0.0/8 gateway=10.1.30.1 pref-src=10.1.30.89
/ip service
set telnet disabled=yes
set ftp address=0.0.0.0/0 disabled=yes
set www address=192.168.88.0/24
set ssh address=192.168.88.0/24
set api address=192.168.88.0/24
set winbox address=192.168.88.0/24
set api-ssl address=192.168.88.0/24
/ip upnp
set enabled=yes
/ip upnp interfaces
add interface=bridge type=internal
add interface=ether1 type=external
/system clock
set time-zone-name=***
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN