Имею на руках 2011UiAS-2HnD. Успешно был настроен под Билайн L2TP. Потом перешел по акции на РТК 500 Мбит.
Внес изменения для получения IP адреса на WAN порту по DHCP. L2TP соответственно отключил.
Но скорость выше 150 Мбит не поднимается (проводом). При подключении напрямую в бук плавает от 300 до 450. Т.е. в идеале должно работать.
Подскажите, что необходимо поменять в настройках?
Код: Выделить всё
# model = 2011UiAS-2HnD
/interface bridge
add admin-mac= auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether1 ] comment=WAN mac-address= \
name=ether1-BEELINE speed=100Mbps
set [ find default-name=ether2 ] name=ether2-master speed=100Mbps
set [ find default-name=ether3 ] speed=100Mbps
set [ find default-name=ether4 ] speed=100Mbps
set [ find default-name=ether5 ] speed=100Mbps
set [ find default-name=ether6 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full name=\
ether6-master
set [ find default-name=ether7 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full mac-address=\
54:AB:3A:97:46:39
set [ find default-name=ether8 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether9 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
set [ find default-name=ether10 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full
/interface list
add exclude=dynamic name=discover
add name=mactel
add name=mac-winbox
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=\
allowed mode=dynamic-keys name=profile1 supplicant-identity="" \
wpa2-pre-shared-key=
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode \
ampdu-priorities=0,1,4,5 antenna-gain=0 band=2ghz-onlyn bridge-mode=\
disabled channel-width=20/40mhz-Ce country=russia2 disabled=no distance=\
indoors frequency=auto frequency-mode=manual-txpower hw-protection-mode=\
rts-cts installation=indoor mode=ap-bridge security-profile=profile1 \
ssid= wps-mode=disabled
/interface wireless nstreme
set wlan1 enable-polling=no
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
/ppp profile
add change-tcp-mss=yes name=beeline remote-address=192.168.255.254 \
use-compression=no use-encryption=no
/interface l2tp-client
add add-default-route=yes allow=chap,mschap2 connect-to=\
tp.internet.beeline.ru max-mru=1500 max-mtu=1460 name=beeline password=\
profile=beeline user=
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
sword,web,sniff,sensitive,api,romon,dude,tikapp"
/interface bridge port
add bridge=bridge comment=defconf interface=ether2-master
add bridge=bridge comment=defconf interface=ether6-master
add bridge=bridge comment=defconf hw=no interface=sfp1
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge interface=ether3
add bridge=bridge interface=ether4
add bridge=bridge interface=ether5
add bridge=bridge interface=ether8
add bridge=bridge interface=ether9
add bridge=bridge interface=ether10
/ip neighbor discovery-settings
set discover-interface-list=discover
/interface list member
add interface=sfp1 list=discover
add interface=ether2-master list=discover
add interface=ether3 list=discover
add interface=ether4 list=discover
add interface=ether5 list=discover
add interface=ether6-master list=discover
add interface=ether7 list=discover
add interface=ether8 list=discover
add interface=ether9 list=discover
add interface=ether10 list=discover
add interface=wlan1 list=discover
add interface=bridge list=discover
add interface=bridge list=mactel
add interface=bridge list=mac-winbox
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
/ip dhcp-client
add comment=defconf default-route-distance=5 dhcp-options=\
hostname,clientid,clientid_duid disabled=no interface=ether1-BEELINE
/ip dhcp-server lease
add address=192.168.88.248 client-id=1:1c:1b:d:b:89:72 mac-address=\
1C:1B:0D:0B:89:72 server=defconf
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes servers=8.8.8.8
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment="defconf: accept established,related" \
connection-state=established,related
add action=drop chain=input comment="defconf: drop all from WAN" \
in-interface=ether1-BEELINE
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment="defconf: accept established,related" \
connection-state=established,related
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface=ether1-BEELINE
add action=accept chain=input connection-state=established in-interface=\
ether1-BEELINE
add action=accept chain=input connection-state=related in-interface=\
ether1-BEELINE
add action=drop chain=input in-interface=ether1-BEELINE
add action=jump chain=forward in-interface=ether1-BEELINE jump-target=\
customer
add action=accept chain=customer connection-state=established
add action=accept chain=customer connection-state=related
add action=drop chain=customer
add action=drop chain=customer
/ip firewall nat
add action=masquerade chain=srcnat disabled=yes out-interface=beeline \
src-address=192.168.88.0/24
add action=masquerade chain=srcnat out-interface=ether1-BEELINE src-address=\
192.168.88.0/24
# beeline not ready
add action=masquerade chain=srcnat comment="defconf: masquerade" \
out-interface=beeline
/ip firewall service-port
set ftp disabled=yes
set tftp disabled=yes
set irc disabled=yes
set h323 disabled=yes
set sip disabled=yes
set pptp disabled=yes
set udplite disabled=yes
set dccp disabled=yes
set sctp disabled=yes
/ip route
add disabled=yes distance=1 dst-address=78.107.1.0/24 gateway=176.15.16.1
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set winbox address=192.168.88.0/24
set api-ssl disabled=yes
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/ip upnp
set enabled=yes
/ip upnp interfaces
add interface=ether7 type=external
add interface=bridge type=internal
add interface=ether1-BEELINE type=internal
add interface=ether2-master type=internal
add interface=ether3 type=internal
add interface=ether4 type=internal
add interface=ether5 type=internal
add interface=ether6-master type=internal
add interface=ether8 type=internal
add interface=ether9 type=internal
add interface=ether10 type=internal
/lcd
set time-interval=hour
/lcd interface pages
set 0 interfaces="sfp1,ether1-BEELINE,ether2-master,ether3,ether4,ether5,ether\
6-master,ether7,ether8,ether9,ether10"
/system clock
set time-zone-name=Europe/Moscow
/system identity
set name=
/system ntp client
set enabled=yes primary-ntp=23.105.225.212 secondary-ntp=95.128.246.34
/tool mac-server
set allowed-interface-list=mactel
/tool mac-server mac-winbox
set allowed-interface-list=mac-winbox