Torch на том же интерфейсе (WGuest) всё видит. Но счётчик трафика самой очереди (GuestSpeedLimit) - пустой.
Примечательно, если на самом интерфейсе WGuest применить тип очереди GuestSpeedLimit-BiDir, то ограничение на нем начинает работать, но только на download. Почему так - ума не приложу. Что еще проверить?
Код: Выделить всё
# jan/02/2022 01:36:16 by RouterOS 6.49.2
# software id = 4TGZ-P2S0
#
# model = RBcAPGi-5acD2nD
/interface bridge
add admin-mac=08:55:31:23:82:CA auto-mac=no name=LAN_bridge vlan-filtering=yes
/interface ethernet
set [ find default-name=ether1 ] comment="To MainRouter"
/interface vlan
add interface=LAN_bridge name=CommonVLAN vlan-id=1
add interface=LAN_bridge name=GuestVLAN vlan-id=200
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX country=no_country_set disabled=no distance=indoors frequency=auto hide-ssid=yes installation=indoor mode=ap-bridge name=WLAN2.4 security-profile=default \
ssid=WiFi2.4 station-roaming=enabled wireless-protocol=802.11 wps-mode=disabled
add disabled=no keepalive-frames=disabled mac-address=0A:55:31:23:82:CB master-interface=WLAN2.4 multicast-buffering=disabled name=WGuest security-profile=defGuest ssid=Guest vlan-id=200 wds-cost-range=0-4294967295 wds-default-cost=0 wps-mode=push-button-5s
/queue simple
add max-limit=512k/512k name=GuestSpeedLimit target=WGuest,WGuest
/queue type
add kind=pcq name=GuestSpeedLimit-BiDir pcq-burst-rate=1M pcq-burst-threshold=256k pcq-burst-time=5s pcq-classifier=src-address,dst-address pcq-rate=512k pcq-total-limit=1000KiB
set 6 pcq-rate=2M pcq-total-limit=1000KiB
set 7 pcq-rate=2M pcq-total-limit=1000KiB
/interface bridge port
add bridge=LAN_bridge comment=defconf interface=WLAN2.4
add bridge=LAN_bridge interface=ether1
add bridge=LAN_bridge interface=WGuest pvid=200
/interface bridge vlan
add bridge=LAN_bridge tagged=ether1,LAN_bridge vlan-ids=1
add bridge=LAN_bridge tagged=ether1,LAN_bridge vlan-ids=200
/ip address
add address=192.168.11.40/24 interface=CommonVLAN network=192.168.11.0
add address=192.168.200.40/24 interface=GuestVLAN network=192.168.200.0
/ip dhcp-relay
add dhcp-server=192.168.11.1 disabled=no interface=CommonVLAN local-address=192.168.11.40 name=CommonDHCP_Relay
add dhcp-server=192.168.200.1 disabled=no interface=GuestVLAN local-address=192.168.200.40 name=GuestDHCP_Relay
/ip firewall filter
...
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related disabled=yes
...
